Skip to main content

SSP28 - Spare Parts

Genuine Novritsch SSP28 spare parts, sorted by assembly: the hop-up chamber and inner barrel, the blowback unit and split slide, the hammer unit and fire selector, plus magazine valves, follower and spring and feed lips. Use them to keep the pistol running at the speed it was built for.

Hop-up and barrel

SSP28 accuracy depends on the Novritsch SSP28 Hop-Up Chamber and the Novritsch SSP28 Inner Barrel. If BBs start to spread or the hop-up will not hold its setting, check these two parts first. The Novritsch - SSP28 Nozzle loads every BB into the chamber and works under constant load at 28 rounds per second.

Slide and internals

The split slide is serviced with the Novritsch SSP28 Back Slide, Top Cover and Sights and Slide Cover. The Novritsch SSP28 Blowback Unit drives the recoil, while the Hammer Unit Assembly and Fire Selector Set look after the trigger group. The Screw and Spring Set holds the small screws and springs that are easy to lose during a strip-down.

Magazine parts

  • Gas leaks: replace the Magazine Infill Valve or Magazine Exhaust Valve.
  • Feeding jams: check the Magazine Feeding Lip & Gas Route.
  • Weak BB feed: the Magazine Follower & Spring restores spring tension.
  • Magazine won't lock: replace the Novritsch SSP28 Magazine Release.