Description
The Specna Arms SPE-06-049129 is designed as a practical solution for AK AEG replicas where the standard battery compartment is limited or inconvenient to access.
LiPo technology provides high performance in a compact package and does not suffer from the memory effect associated with some older rechargeable battery technologies.
The 1200mAh capacity offers a good balance between runtime and compact size. The 20C/40C discharge rating provides stable current delivery to the AEG motor, including during more intensive firing.
The battery uses a 2S / 7.4V configuration and features a T-Connect (Deans) connector for a reliable electrical connection. Its main advantage is the dedicated form factor that allows positioning under/in the receiver cover and magazine-well area of compatible AK replicas.
3. Key Advantages
- 7.4V / 2S LiPo battery
- 1200mAh capacity
- 20C / 40C discharge rating
- T-Connect (Deans) connector
- Special design for AK replicas
- Designed for installation in the magazine-well area
- Compact dimensions
- Low weight – approximately 50 g
- Suitable for AEG replicas
- Excellent for CQB and dynamic gameplay
- Does not occupy standard stock or handguard battery space
4. Technical Specifications
| Specification | Value |
|---|---|
| Brand | Specna Arms |
| Type | LiPo |
| Voltage | 7.4V |
| Capacity | 1200mAh |
| Configuration | 2S / 2 cells |
| Discharge Rate | 20C / 40C Burst |
| Connector | T-Connect / Deans |
| Length | 180 mm |
| Width | 14 mm |
| Height | 8 mm |
| Weight | approx. 50 g |
| Application | AK AEG airsoft replicas |
| Installation | Magazine-well area |
| Product Code | SPE-06-049129 |
| EAN | 5902543221803 |
The dimensions and weight are based on the published product specifications.
5. Safety & Usage
The battery must be charged only with a suitable LiPo charger featuring a Balance function.
Do not use a NiMH charger with this battery.
Do not discharge below 3.0V per cell or charge above 4.2V per cell. For this 2S battery, this corresponds to approximately 6.0V minimum and 8.4V maximum pack voltage.
After gameplay, the battery should be disconnected from the replica. For long-term storage, use the appropriate LiPo Storage mode on a compatible charger.
6. Compatibility
The battery is primarily designed for AK AEG replicas where the construction allows installation in the magazine-well area.
Before purchasing, make sure that there is sufficient space inside your replica and that the T-Connect (Deans) connector is compatible.
Additional Information
Brand
Specna Arms
Capable
AK - platform
Reviews